PV-ezRack® Unveils Ascent Ballast Series for Flat Roofs

PV-ezRack® has recently announced the launch of two new low ballast solar mounting systems for flat roofs, dubbed PV-ezRack® Ascent and PV-ezRack® Ascent Wings respectively.

PV-ezRack® has recently announced the launch of two new low ballast solar mounting systems for flat roofs, dubbed PV-ezRack® Ascent and PV-ezRack® Ascent Wings respectively.


The PV-ezRack® Ascent is a low ballast, south/north facing solution without rails for PV installation on flat roofs.

The PV-ezRack® Ascent Wings is a low ballast, east/west facing rail-less system, which provides optimal surface utilization and yield for structurally challenging roofs with limited ballast options. With multiple angular options available, Ascent Wings allows maximized energy production.

Both Ascent and Ascent Wings are enhancements from the PV-ezRack® ComT with Ballast, a mounting solution exclusively designed for ballast systems last year. Compared with ComT with Ballast, the newly developed products boast an optimized structure and a more flexible tilt angle, with easier installation and a lower ballast.

Lannes Cai, Technical Manager at Clenergy commented: "Clenergy has invested heavily in the R&D sector in recent years. Our in-house R&D team has developed seven innovative product lines for flat roofs thus far. It is exciting to have another two new additions. And we will continue to investment more into product development in response to the worldwide diversified technical requirements for solar applications."

Why should you select Ascent for your solar installation? See below the top 3 benefits for this newly released low ballast mounting solution.

Reduced Ballast through Aerodynamic Optimization
Aerodynamically optimised structure contributes to a lowering of the ballast.

PV-ezRack® Ascent and Ascent Wings have also been subjected to the stringent boundary layer wind tunnel test, conducted by the established wind tunnel test agency Wacker Ingenieure GmbH (Wacker). The test report is available upon request.

Structural optimisation, plus the wind tunnel test, ensures optimum ventilation for maximum energy output.

High Efficiency in Installation and Warehouse Management
Thanks to the click connection between the Legs and Bases, no additional tools are required for their assembly.

Additionally, the storage space is greatly reduced due to the innovative Rear Leg Extension, thereby saving the cost of warehouse management.

Compatibility with Solar PV Systems
With a special design and a tilt angle of 10° and 15°, both Ascent and Ascent Wings are compatible with PV modules up to 2180x1100mm (length by width). They are additionally flexible to PV module frames, with the height ranging from 30mm to 46mm.

Ascent and Ascent Wings also accommodate other accessories, such as optimisers and micro-inverters.

The solution is manufactured from aluminum, featuring excellent corrosion resistance. Both mounting systems have passed TUV certification. They also comply with various internationally recognized standards, including Eurocode 0-9, AS NZS1170.2-2011, JISC8955, and ASCE 7-10.

For more information, click here: https://www.clenergy.com/product/flat-roof/ascent/

Featured Product

SOLTEC – SFOne single axis tracker

SOLTEC - SFOne single axis tracker

SFOne is the 1P single-axis tracker by Soltec. This tracker combines the mechanical simplicity with the extraordinary expertise of Soltec for more than 18 years. Specially designed for larger 72 an 78 cell modules, this tracker is self-powered thanks to its dedicated module, which results into a lower cost-operational power supply. The SFOne has a 5% less piles than standard competitor, what reduces a 75% the labor time.