IBM's Hybrid Renewable Energy Forecaster
The Hybrid Renewable Energy Forecasting (HyREF) solution combines big data analytics and weather modeling technology to accurately forecast the availability of wind power and solar energy.
Solar Cell Efficiency Levels; What Does it Mean for Me?
The technology breakthroughs that are helping solar cells approach 50 percent efficiency levels are encouraging, but everyday applications are still years away.
MicroPower Ready To Realise The Potential Of Thermoelectrics For Waste Heat Recovery
Thermoelectrics is a means of utilising thermal energy by converting it to electrical energy so that, when there is a heat differential between the opposing sides of certain semiconductor materials, the difference in temperatures causes the electrons in the material to move, creating an electric current.
Fuel Cell and Green Technology - SSFTV
SSFTV means Solar used hydrogen production, Solid state hydrogen storage, Fuel cell (PEM), Tornado power generation and finally Vapour absorption refrigeration cycle. This is a group of Green Technology ideas which can be used in corporates, industries and houses.
New solar cell technology improves efficiency by 15%
Three months of experimental validation allowed us to refine the technique to the point we could pursue grant funding from the National Science Foundation (NSF) Small Business Innovation Research (SBIR) program and submit a provisional patent application.
Turnkey Photovoltaic Robotics
A turnkey automation provider like Reis, with extensive experience in solar module manufacturing specifically, can help you derive the best configuration for your product and your business plan.
It's Massive Yet Tiny
A 14 x 14" MYT engine has 850 cubic inches of displacement and weighs 150 pounds, compared to a conventional engine, which would weigh 3,000 pounds to produce the same power. The engine needs no oil, as the biofuel is the lubricant due to the high lubricity of biofuel. With every tank of fuel, the engine is circulated with more than 20 gallons of fresh engine oil compared to 5 quarts of engine oil circulating over 3,000 miles in conventional engines. You can now skip changing oil forever and have an engine with longer life.
Bankable Data and Interoperability Standards
Data quality derives from the combination of accurate instruments plus Data Encoding Standards: one can take highly accurate data samples but if there is no agreement as to what the data means, the data could be considered to be of low quality because of its inability to improve the decision making process.
Battery Performance of Microfiber/Nanofiber Lithium Ion Battery Separators
Current stretched porous film battery separators for lithium ion batteries are thin, strong, and provide a good barrier between electrodes, at the cost of having very high internal resistance and low ionic flow due to low porosity and high "dead space" that come from starting with a solid material and trying to impart porosity. This work uses an alternative approach, where linear nanofibers and microfibers are combined in wet laid nonwoven processes to give separators that are strong and thin, but have higher porosity (60-70%) and so have much higher ionic flow.
Nuclear Fusion
Research into controlled fusion, with the aim of producing fusion power for the production of electricity, has been conducted for over 60 years. It has been accompanied by extreme scientific and technological difficulties, but has resulted in progress. At present, controlled fusion reactions have been unable to produce break-even (self-sustaining) controlled fusion reactions. Workable designs for a reactor that theoretically will deliver ten times more fusion energy than the amount needed to heat up plasma to required temperatures (see ITER) were originally scheduled to be operational in 2018, however this has been delayed and a new date has not been stated.
Magnetic Energy
Is a perpetual magnetic generator impossible? Maybe, but there have been several patents issued on this theory and as the cost of energy keeps rising, more scientists will be searching for ways to make a working practical perpetual magnetic generator.
Momentum / Inertial Energy
Where M/I shines is in the delivery of vast amounts of energy with no fuel cost. When compared to other non-fuel sources, [solar, wind and hydro-electric] a dense 1 mile M/I installation will generate, during rush hour, as much energy as a 3 square mile photovoltaic installation on a very sunny day.
Separation of electrolytes from non-electrolytes by pseudo-charge mosaic membranes
The piling of anion and cation ion exchange membranes can provide a kind of pseudo-charge mosaic membranes and that can be practically used in various industrial applications, and is worth of further detailed studies.
IHS iSuppli Teardown Analysis of Solar Inverter, Identifying the Cost-Reduction Opportunities
In its first-ever dissection of a solar power inverter, IHS has determined the bill of materials (BOM) of a major manufacturer's product, providing a path-setting benchmark for cost reduction in a market expected to undergo rapid price erosion in the coming years.
Solar Cogeneration Technology
Solar cogeneration of electricity and hot water maximizes the economic and environmental value of energy derived from the sun. Cogenra's system produces as much electricity as photovoltaic (PV) technology allows, then captures most of the remaining energy as hot water, in total exploiting over 70% of the energy incident from the sun.
Records 241 to 255 of 317
First | Previous | Next | Last
Featured Product
SOLTEC - SFOne single axis tracker
SFOne is the 1P single-axis tracker by Soltec. This tracker combines the mechanical simplicity with the extraordinary expertise of Soltec for more than 18 years. Specially designed for larger 72 an 78 cell modules, this tracker is self-powered thanks to its dedicated module, which results into a lower cost-operational power supply. The SFOne has a 5% less piles than standard competitor, what reduces a 75% the labor time.
