SeaRoc successfully install floating wind lidar for Garden State Offshore Energy – SeaZephIR® noted as ‘the future of offshore data collection' for wind farms
Garden State Offshore Energy is a planned utility scale project of approximately 1,000MW installed capacity, over 20 miles offshore due east of Avalon, NJ.
DEGER equips two solar parks in Bosnia- Herzegovina with 30 Tracking Systems
DEGER is world market leader in the field of solar tracking system.
GE Turbines Powering Bhoruka Wind Farm in Karnataka, India
Turbine Production Outpacing Projected Power Output-----
Project Installed and Commissioned Ahead of Schedule-----
GE Operating and Maintaining the 17, 1.5-77 Turbine Fleet
New Vishay Foil Resistors Alternative Energy Video Simulation Highlights the Stability of VCS1625Z Current Sense Resistor in Solar Panels
The resistor's stability won't change due to self-heating when carrying increased current loads.
Google invests $75 million in RPMA-owned Iowa wind farm
The 50 megawatt facility, located in Greene County, Iowa was built
by RPMA
Despite Devastating Impact of Sandy, Wind Energy Helps to Keep the Lights On in Northeast DWEA Members Report Little to No Impact on Wind Turbines along East Coast
Stories include little to
no damage to members' wind turbines from North Carolina to New York, and
beyond.
The Potential of Biofuels to Help Combat Climate Change - Join the Biodiesel and Waste Conference at World Biofuels Markets Exhibition and Congress
The biodiesel industry is changing apace. What was an established and secure global industry has been shaken by recent governmental support across the world for next generation production.
GE Installs 20,000th Wind Turbine
Today, GE celebrates its 20,000th wind turbine installation in conjunction with its 10-year anniversary in the wind industry. Altogether, GE's 20,000-turbine fleet has the capacity to power the cities of Hong Kong and London for an entire year.
"We couldn't have achieved this milestone without our development partners," said Vic Abate, vice president of renewable energy for GE. "Together, we have advanced wind to its current status as a relevant, reliable, competitive source of energy."
In the U.S. and Europe, 40 percent of new power generation installations over the last four years have been wind. GE achieved its 10,000th turbine milestone in November 2008, its 15,000th in February 2011 and in 2012 celebrates its 20,000th installation.
"We congratulate GE on this impressive achievement," said Jim Shield, Invenergy's executive vice president and chief development officer. "Our longstanding association has resulted in the installation of more than 2,000 GE wind turbines at Invenergy projects across the United States. As America's largest independent wind power generation company, we look forward to a continued, successful relationship with GE in the years to come."
Offshore Wind Energy Compliance - Recommended Practices
The American Wind Energy Association has unveiled a set of recommended practices for offshore wind facilities in the U.S. AWEA's Recommended Practices for Design, Deployment and Operation of Offshore Wind Turbines in the United States was developed with the help of the Department of Energy and the National Renewable Energy Laboratory.
Harvesting Wind Power on the Second Floor
Commercial forests are increasingly used as sites for wind farms owned by regional initiatives. However, since air turbulence above treetops can be severe, the wind turbines installed there must be high enough to avoid the turbulence caused by the trees. The latest generation of wind turbines offers hub heights of 140 metres and higher, thereby also producing higher energy yields. Yet, the success of a wind power project stands and falls by reliable cost-benefit analyses and wind power forecasting.
Why is vanadium important to the renewable energy sector?
Lithium vanadium phosphate batteries add vanadium to the cathode of electric vehicle batteries. The result is a power source capable of producing more than six times the power of the typical lithium-ion batteries in such electric vehicles as the Chevrolet Volt or the Nissan LEAF (210 watts of power as opposed to 33 watts).
Using Alternative Energy for International Rescue Operations
International Rescue Group installed two of OutBack Power's FLEXmax 80 charge controllers on board the Thunderbird 2. In combination with a 1.5 kilowatt array of BenQ solar panels and large bank of L16 batteries, OutBack's charge controllers make International Rescue Group's flagship boat a model for the rest of the fleet.
Panasonic Eco Solutions North America
Our platform is focused primarily on the commercial scale market, though we have some utility scale opportunities and are evaluating the residential sector. We have the capabilities to implement rooftop, ground mounted or parking canopy systems.
CBD Energy's merger with Westinghouse Solar
CBD Energy's merger with Westinghouse Solar aligns with our strategy to create a more highly diversified business and accelerate access to growth opportunities in the renewable energy sector globally and in the US. The merger offers an ideal platform for the expansion of CBD Energy's business in the US, the world's largest market, and plans for U.S. operations built around its core strengths in design, engineering, procurement and construction (EPC) of commercial solar projects; energy efficiency and storage technologies; and energy services.
Baker Electric Solar Announces New Referral Partner Program
Baker Electric Solar is pleased to announce its new referral partner program. The program is open to everyone—with iPad Mini plus $50 Apple gift card or $400 cash bonus when a referral results in a new customer solar installation.
Records 19486 to 19500 of 30200
First | Previous | Next | Last
Solar Power - Featured Product
MORNINGSTAR - GenStar MPPT
GenStar MPPT is the industry's first fully integrated solar DC charging system, an all-new design with "lithium DNA" from the leader in charge controllers. Out of the box, GenStar is an overachiever-delivering legendary Morningstar quality, efficiency, power and reliability along with the latest in advanced communications and control technologies. All the most installer-requested features are on-board; additional features can be easily added via Morningstar's ReadyBlock expansion technology, with snap-in blocks that provide battery metering and monitoring, signaling and load control, and lithium battery communications/control
