JinkoSolar Becomes First Chinese PV Manufacturer to Pass 160 KWh/m2 UV Test (according to IEC 61345)
JinkoSolar Holding Co., Ltd. ("JinkoSolar" or the "Company") (NYSE: JKS), a global leader in the PV industry, today announced that its modules have passed intensive UV test in terms of IEC61345 from TUV Rheinland.
SHANGHAI, May 16, 2017 /PRNewswire/ -- JinkoSolar Holding Co., Ltd. ("JinkoSolar" or the "Company") (NYSE: JKS), a global leader in the PV industry, today announced that its modules have passed intensive UV test in terms of IEC61345 from TUV Rheinland.
Comparing with test procedure of UV Preconditioning test defined in IEC61215, which is the major international standard of the industry, IEC 61345 intend to verify the sample's UV resistance under different ultraviolet level ("UVA", 320nm~400nm "UVB", 280nm~320nm). By considering the test condition of that, Jinko required TUV Rheinland to perform the special UV test which had more than 160KWh/m2 irradiance for exposure (137.84KWh/m2 for front side and 30.07KWh/m2 for rear side). And power degradation was less than 5%.
"I'm proud that JinkoSolar is the first Chinese PV manufacturer to pass intensive UV test according to IEC61345, which further demonstrates our technology strength and leading position in the industry," commented Mr. Kangping Chen, Chief Executive Officer of JinkoSolar. "We have always been committed to providing our clients with the highest quality and most reliable products while being at the forefront of solar technology."
About JinkoSolar Holding Co., Ltd.
JinkoSolar (NYSE: JKS) is a global leader in the solar industry. JinkoSolar distributes its solar products and sells its solutions and services to a diversified international utility, commercial and residential customer base in China, the United States, Japan, Germany, the United Kingdom, Chile, South Africa, India, Mexico, Brazil, the United Arab Emirates, Italy, Spain, France, Belgium, and other countries and regions. JinkoSolar has built a vertically integrated solar product value chain, with an integrated annual capacity of 5.0GW for silicon ingots and wafers, 4.0GW for solar cells, and 6.5 GW for solar modules, as of December 31, 2016.
JinkoSolar has over 15,000 employees across its 6 productions facilities in Jiangxi, Zhejiang and Xinjiang Provinces, China, Malaysia, Portugal and South Africa, and 15 overseas subsidiaries across Japan (2), Singapore, India, Turkey, Germany, Italy, Switzerland, United States, Canada, Mexico, Brazil, Chile, Australia and South Africa. JinkoSolar has 18 global sales offices across China (2), United Kingdom, Bulgaria, Greece, Romania, United Arab Emirates, Jordan, Saudi Arabia, Kuwait, Egypt, Morocco, Ghana, Kenya, Costa Rica, Colombia, Brazil and Mexico.
To find out more, please see: www.jinkosolar.com
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.