American wind power now generates over 10 percent of electricity in nine states

In Iowa and South Dakota, wind energy is more than one-fifth of total energy production

WASHINGTON, D.C., March 13, 2013 – The American wind industry experienced record-breaking growth in 2012 as a U.S. power provider. American wind power's generation shot up 117 percent last year, and produced more than 10 percent of the electricity in nine states, up from five states in 2011. Those numbers are likely to continue growing as new investments and wind projects are announced. Across the country, wind energy produced 3.5 percent of the nation's electricity during 2012, according to the Energy Information Admiration's (EIA) latest figures.


"With wind power serving as the number one source of new generating capacity in 2012, it's no surprise that wind energy is increasing its role in the overall U.S. power mix," said Elizabeth Salerno, Director of Industry Data & Analysis at the American Wind Energy Association (AWEA).

The growth in wind energy in the U.S. can also be seen in its increasing role in the generation mix of individual states. Iowa and South Dakota reached generation levels greater than 20 percent throughout the entire year of 2012. In a total of 14 states, American wind energy provides 5 percent or more of generation.

Iowa was ranked first in wind generation, with 24.5% generation from wind energy. South Dakota was a close second with 23.9% generation from wind energy. North Dakota ranked third Minnesota closely followed, ranking fourth with over 14% wind energy generation. Kansas, which doubled its installation of wind power during 2012, jumped ahead to No. 5 position in wind generation, surpassing the 10% mark, reaching 11.4% generation from wind energy. For the full list, please visit AWEA's release at http://bit.ly/Wn7yvO.

"We are generating enough clean, affordable, American wind energy to power the equivalent of almost 15 million homes, or the number in Colorado, Iowa, Maryland, Michigan, Nevada, and Ohio combined," continued Salerno.

The geographic diversity and abundance of American wind installations is a reflection of the United States' strong wind resource. In a 2010 study, the National Renewable Energy Laboratory reported over 10 million MW of wind resource in the U.S., enough to power the equivalent of the nation's total electricity needs 10 times over. In fact, 25 states have enough wind potential to supply as much electricity as is currently generated from all energy sources in their state.

Texas, the state that uses the most electricity, relied on wind energy for 9.2% of the electrical generation last year on the Electric Reliability Council of Texas (ERCOT) power grid. The Lone Star State boasts more wind power than any other state, with more than 12,000 MW installed – over a fifth of the 60,000 MW in the United States at the end of last year.

Overall, the U.S. wind energy industry had its strongest year ever in 2012, installing a record 13,124 megawatts (MW) of electric generating capacity, leveraging $25 billion in private investment, and achieving over 60,000 MW of cumulative wind capacity.

In this historic year of achievement, wind energy for the first time became the number one source of new U.S. electric generating capacity, providing some 42 percent of all new generating capacity. Renewable energy as a whole accounted for over 55 percent of all new U.S. generating capacity in 2012.

Note: The statistics count megawatt-hours generated in a state as going to that state. For a state like California, which may be importing wind, these totals are lower than the total renewable energy used to comply with the state's Renewable Portfolio Standard.

About the American Wind Energy Association (AWEA)

AWEA is the national trade association of America's wind industry, with 2,000 member companies, including global leaders in wind power and energy development, wind turbine manufacturing, component and service suppliers, and the world's largest wind power trade show, the WINDPOWER Conference & Exhibition, which takes place next in Chicago, May 5-8, 2013. AWEA is the voice of wind energy in the U.S., promoting renewable energy to power a cleaner, stronger America. Look up information on wind energy at the AWEA website. Find insight on industry issues at AWEA's blog Into the Wind. Join AWEA on Facebook. Follow AWEA on Twitter.

###

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.