SolarMount Top Mounting�Faster Than Ever With T-Bolts
UniRac introduces T-bolt to further speed installation using its top mounting SolarMount system for racking photovoltaic arrays.
The fastest, easiest way to install a PV array is getting faster and easier. In June, UniRac will begin shipping T-bolts with our top mounting SolarMount systems.
More Headlines
- Thermal imaging for hydrogen flame detection and monitoring
- The MBS plant in Westerwald relies on high-performance processing from Vecoplan
- Vogelsang USA to Showcase PreMix Biogas Feedstock Preparation Solution at Biogas Americas 2025
- SolaREIT Expands Revolving Credit Facility to $60 Million with Atlantic Union Bank and EagleBank
- Powin and TÜV Rheinland Expand Strategic Partnership to Advance Energy Storage Safety and Innovation
T-bolts replace 1/4-inch hexhead bolts used with top mounting clamps to secure PV modules to the rails. They drop into the module mounting slot�anywhere along the length of the rail. The bolts capture with less than a quarter turn.
For example, rails that hold four 150-watt modules are typically 15 feet long. Instead of sliding in a hexhead bolt from the end of the rail, an installer can quickly drop in a T-bolt wherever it's needed.
The rail and T-bolt combination has undergone destructive laboratory testing at the University of New Mexico's Department of Civil Engineering. It remains UBC compliant when installed in accordance to UniRac's code-compliance documentation.
As with many recent UniRac innovations, this upgrade takes place with no price increase or model number change. All CT Series top mounting clamp sets will include T-bolts within two to three weeks.
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
