IMSA has built an off-grid Solar Powered Electric Vehicle Charging Station to demonstrate the viability of EV solar charging technology.

Daytona Beach Puts EV Charger in the Fast Lane
Daytona Beach Puts EV Charger in the Fast Lane

Article from | Victron Energy

Daytona International Speedway has been thrilling audiences with diverse motor racing events for over 60 years.

North America’s most prestigious endurance sports car racing event, the Rolex 24 at Daytona has just taken place. The event heralded the arrival of a brand-new racing class – the Grand Touring Prototype (GTP) – which uses hybrid powered vehicles.

With this new class, motorsport sanctioning body International Motor Sport Association (IMSA) are sowing the seeds of a greener future in motor racing.

 

At Daytona’s 500-acre site thousands of spectators can enjoy a ring-side seat following the venue’s high-speed racing, nip and tuck, along a three and a half mile circuit that incorporates the facility’s legendary high banks as well as portions of the infield.

And beginning this year there’s a new trackside feature at Daytona  – putting their money where their mouth is, IMSA has built an off-grid Solar Powered Electric Vehicle Charging Station to demonstrate the viability of EV solar charging technology.

Spectators, visiting teams, and top officials from the cutting-edge automotive manufacturers will be aware of the installation which is housed at IMSA’s traveling Konica Minolta Business Center. The rolling facility travels to each of the 11 races on the IMSA calendar and is used for meetings between senior members of the motor industry or other current and prospective business partners and IMSA representatives.

At future IMSA race events, the Konica Minolta Business Center will feature  big-screen, EV charging status direct from the power monitor, so that forward-thinking race-goers can observe the power transfer straight from the sun to the vehicle in real time!

The EV charging station is now a permanent fixture on IMSA’s traveling Konica Minolta Business Center – which is centrally located in the garage or paddock area of every IMSA event. Everybody who is anybody in motorsport will walk past the demonstration unit and be able to follow the numbers as it charges vehicles such as the BMW XM PHEV – using free energy from the sun.

The installation consists of 2 x Quattro 48/10000/140 Inverter/Chargers configured for split-phase operation. In addition to providing up to 16kW continuously the Quattros can fast charge the batteries from AC, from connections to the electricity network and a generator, for example …automatically switching to the live power source.

 

The on-board Lithium Ion battery bank features 24 Battle Born 12V 270Ah units storing almost 80kW of energy. On the walk-on roof 12 MerlinSolar flexible solar panels have been installed which can provide up to 5kWp.

Lynx Shunt controls battery charging from either the Photovoltaic panels or external AC, and power distribution is neatly made using the Lynx Distributor – which provides busbars with monitored fuses.

 

 

The installation supplies two EV Charging Stations, and powers the AC sockets and lighting on board the mobile meeting facility. At the heart of the system a Cerbo GX monitors and controls solar power harvest and battery charging, and also provides authorised users with a touch-screen interface via the GX Touch 70, smart phone access, and remote monitoring and control using the web based platform VRM.

The system was built by Un-Plugged RVs whose George Agutter says he was really excited to be chosen to build this facility. The solar roof of the trailer is a work area every time the awning needs to be deployed. Walk-on MerlinSolar flexible panels, supplied and fitted by RRL Motorsports’ Rob Lebel, allow the entire roof area to be used for solar harvest. Working at short notice, George and his team designed and built a unique installation with huge storage and split-phase power supply which has worked faultlessly right from switch-on.

Tyler Bourns – whose company Dragonfly Energy supplied the batteries – is excited too: I think this trailer build, along with it’s incredible off grid power system, is going to open a lot of people’s eyes to the possibilities of using lithium power in unique applications.

Back at the race track – nine new-build hybrid GTP racing cars entered the event among a total field of 61 cars. Eight GTP cars completed the gruelling race right to the finish line almost 800 laps later! Meyer Shank Racing’s Tom Blomqvist drove the pole-winning No. 60 Acura ARX-06 along with team-mates Colin Braun, Helio Castroneves and Simon Pagenaud winning by 4.19s.

The race winner was built by Honda Performance Development whose team worked for two years on their vehicle.

The Daytona International Speedway track will be busy again on the 19th February with the launch of the 2023 NASCAR season  and the world famous Daytona 500.

 

Acknowledgement

We’re grateful to David Pettit of IMSA and his team for their groundbreaking initiative, and for providing the background information for this story and – together with Tyler Bourns, Meyer Shank Racing, and George Agutter – for providing the images above.

 

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.