Maxwell Technologies’ 16V small cell ultracapacitor module provides energy storage and power delivery in a compact, cost effective module. The modules are specifically engineered to provide cost-effective solutions for 1.5MW and smaller wind turbine pitch control, small UPS systems, telecommunications and other lighter duty industrial electronics applications. The 16V module is based upon the high reliability, 350F radial D-Cell®. In addition to meeting or exceeding demanding industrial application requirements for both watt-hours of energy storage and watts of power delivery per kilogram, all of these products will perform reliably for more than five hundred-thousand discharge-recharge cycles.
Learn More About Maxwell Technologies, Inc.
Mersen’s new HP10J photovoltaic fuse line provides superior overcurrent protection at the re-combiner box and inverter levels and covers applications ranging from 70A to 400A, 1000VDC. The enhanced fuse construction of the HelioProtection series makes it ideal for continuous temperature and current cycling withstand adding to system longevity. Low minimum breaking capacity capabilities of 1.35 times the fuse-rated current value allows for safe circuit interruption under typical low-fault current conditions produced by PV arrays.
Learn More About Mersen (formerly Ferraz Shawmut)
Going Solar – it’s easier said than done. At Panasonic, we believe everyone should have access to clean, renewable energy. Joining forces with Coronal Group, we’ve developed simple, streamlined solar solutions to remove barriers that once impeded projects. Now we can bring more solar installations to fruition. From concept to design, financing to installation and beyond. Together, the Panasonic-Coronal team can help you go solar – efficiently and cost effectively.
Learn More About Panasonic Eco Solutions North America
XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.
XR Rails are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.
Learn More About IronRidge
The Sunny Boy 240-US offers industry-leading 96% CEC efficiency, design flexibility, simplicity and module-level optimization, all backed by SMA’s unrivaled bankability and service support. It also features exclusive SMA Multigate- US technology, which allows for fewer components exposed to heat stress under the module and greatly improves communication reliability versus other micro inverter systems. An improved cabling concept further elevates the Sunny Boy 240 from the competition by eliminating the need for a trunk cable.
Learn More About SMA America
With more than 2 gigawatts shipped around the world and 25 years of experience, Array Technologies, Inc. (ATI) ensures value, reliability, and bankability for your solar project through its proven ground mount tracking and racking solutions. ATI’s leading products, DuraTrack HZ single-axis horizontal solar tracker and DuraRack fixed-tilt rack, combine a minimization of materials with rugged reliability to promote rapid installation times and project longevity. From the frozen tundra of Alaska to the deserts of Chile, ATI provides high quality solar tracking and racking solutions for every location and environment. ATI’s industry-leading engineering and project management is included with each utility-scale and commercial project to provide a fully-supported and customized solution for your project. For more information on our products and services, please stop by Intersolar North America booth 9725.
Learn More About Array Technologies, Inc.
AET’s solar mounting ECO series includes all the features their customer’s love about their racking solutions in a cost competitive package.
• Industry-leading installation time
• 2-high portrait design optimized for maximum panels per
post based on wind and snow conditions
• Designed for cost-driven projects
• HIGH shipping density, DRAMATICALLY lowers freight bills
• Fits all panels available today
• Single point connection to system ground
• Full layout and loading analysis for every project
• Galvanized for corrosion resistance
• Lightweight for easy handling on the job site.
Contact AET sales at 586.466.5073 or info@AETenergy.com for more information.
Learn More About Applied Energy Technologies (AET)
At Rolls, we've built a reputation for building one mean battery. It's a reputation based on reliability, durability and easy maintenance. Our dual container construction and high-density polyethylene material maximizes durability and eliminates acid leaks even if the outer container ruptures. The unique "resistox" plate design offers more resistance to corrosion and maximizes the life of the battery. The life expectancy of Rolls batteries are amongst the longest in the industry. Try our online Battery Selector to help you find the solution you need.
Learn More About Rolls Battery
PowerGrip Plus Roof Mount System, a watertight structural attachment system used to secure ballasted solar racks and other equipment to roofs covered with thermoplastic (TPO and PVC) membranes. PowerGrip Plus is designed with wind performance in mind and offers ultimate tensile strength of 2,000 lbf. and ultimate shear strength of 1,075 lbf. Properly installed PowerGrip Plus units reduce rack movement and remaining watertight.
PowerGrip Plus units are easy to install, saving both time and labor when compared to alternative options. A wide membrane skirt promotes easy welding in place, and the 15/8 diameter and ½ inch tall mount provides an optimal perch for securing brackets or struts. The exposed 1 inch tall and 3/8 inch diameter bolt and mounting stand are made from corrosion-resistant stainless steel and aluminum alloy for superior long-term performance.
Learn More About OMG Roofing Products
E-Mount features Quick Mount PV’s patented QBlock Elevated Water Seal Technology to provide superior waterproofing and fast, single bolt installation on composition/asphalt shingle roofs. Similar to QMPV’s best-selling Classic Composition Mount, E-Mount uses a smaller, lighter flashing and is priced to compete in highly competitive markets. All stainless steel hardware included. Made in the USA.
Learn More About Quick Mount PV
GreenFasten™ solar panel roof mount hardware by EcoFasten Solar® is designed and manufactured in the USA from recycled materials, features a patented watertight bushing, utilizes lag bolts to secure to the roof, has IAPMO certification, is one of the fastest attachment points to install in the industry, can be used for retrofit applications without removing shingles, available in a variety of configurations, can be customized to fit any proprietary hardware on the market and meets ARRA standards.
Learn More About EcoFasten Solar®
AEE Solar was founded by David Katz 1979 as Alternative Energy Engineering with the goal of bringing renewable, non-polluting power to homes and businesses in the northern California coastal redwood region. Thirty years later, AEE continues to deliver the products, training and support needed to succeed. We supply resellers, contractors, integrators, and installers the field-tested, reliable products they need to design, install and maintain renewable energy systems.
Learn More About AEE Solar
Unirac leads the PV mounting market with industry-leading technology and a breadth of product solutions and services designed to meet the needs of any type of solar installation. We start with the voice of the customer. Unirac collaborates with installers and system integrators who work with a variety of structures and PV modules, in order to deliver mounting solutions that offer the freedom and flexibility, along with the speed, ease and low cost of installation they are looking for. By partnering with the industry's premier integrators and distributors, Unirac delivers custom-designed solutions using highly engineered mounting technology, backed by excellent end-to-end technical support.
Learn More About UniRac Inc.
The FlexRack Series G3L is the latest fixed tilt racking system from Solar FlexRack. This system offers the speed and ease of installation unlike any on the market today. The system ships in a pre-assembled folded position and is simply unfolded and set into place on the jobsite. The speed of installation for the FlexRack Series G3L has been verified by a third party industrial time study institute. The FlexRack Series G3L offers unique module mounting options which allow the installer to use clips, direct bolt, or a combination of both for a flexible module mounting solution. The FlexRack Series G3L also offers integrated bonding and wire management options. Stop by our booth to see a demo of the FlexRack Series G3L and learn about our full product line of racking innovations.
Learn More About Solar FlexRack
Get an efficient power supply system based on lithium technology and receive 12V/24V and 230V/50Hz simultaneously.
The Clayton Power lithium battery system can be charged from the mains via a G3 Combi - inverter/charger, an alternator while driving or from other power sources.
Our lithium ion batteries can be connected in parallel to achieve scalable power capacity and output.
Connect more inverters or inverter/chargers to get a greater 230V output and even faster charging times.
The G3 Combi - Inverter/Charger series, is a combined 230V power supply and intelligent multi charger in one compact unit.
Lithium Ion Batteries
Built-in Battery Management System. 12V and 24V - 100Ah. Scalable up to 2000Ah.
+ Powerful + Low weight + Long lifetime + Fast charging
Clayton Power | Lithium Battery Systems for Mobile, Off-Grid and Storage Solutions
Learn More About Clayton Power
The Zilla® Phantom™ is a revolutionary new rail-less solar mounting system. Building on the popular Zilla® Double Stud Flashing, the Phantom™ can mount anywhere on composite roofs, not just on joists. Additionally, the Zilla® Phantom™ streamlines distribution and transportation allowing for a safer, easier and more economical solar installation. The Phantom™ is a fully flashed and grounded system and includes everything necessary to complete a rooftop solar installation. The Zilla® Phantom™ affords unparalleled layout flexibility and field adjustability that simplify every step of the installation process. Visit ZillaRac.com to learn more.
Learn More About Zilla Corporation
Designed and manufactured in the U.S., the AllSun Tracker is a complete grid-tied, dual-axis solar electric system that produces up to 45% more electricity than fixed systems. The tracker uses GPS and wireless technology to follow the sun throughout the day for optimal energy production. It has an industry-leading 10 year warranty and 120 mph wind rating, superior snow shedding, and automatic high wind protection. Its simple, durable design and complete system pallet simplifies costly procurement and installation time. Contact us about becoming a dealer partner.
Learn More About AllEarth Renewables, Inc
Sun Bandit® is a revolutionary new way in which solar is used to heat water. This innovative new technology utilizes PV technology to deliver clean, reliable hot water by putting the free energy of the sun to work for you in ways that makes owning a solar system more practical and affordable than ever before.
Achieving energy independence has never been easier than with a Sun Bandit® Solar Hybrid Energy System. Sun Bandit® patented technologies eliminates the need for complex solar mechanical water heating and replaces it with clean, simple to install and easy to enjoy PV technology to effectively and efficiently provide hot water. With advance micro grid technology and design, Sun Bandit® can deliver hot water even when the grid goes down. Sun Bandit® is the simplest solar hot water solution on the market, providing the most easy-to-use and economical way to go solar.
Learn More About Sun Bandit
WS501 series Compact Weather Stations for measuring of air temperature, relative humidity, solar radiation, air pressure, wind direction and wind speed. Relative humidity is measured by means of a capacitive sensor element; a precision NTC measuring element is used to measure air temperature. The world renowned technology of Kipp+Zonen CMP3 is integrated. Ultrasonic sensor technology is used to take wind measurements. Measurement output can be accessed by the following protocolls: UMB-Binary, UMB-ASCII, SDI-12, MODBUS. One external temperature or rain sensor is connectable.
The WS503 is a similar sensor available with a tiltable pyranometer for plane of array measurements of solar panels efficiency.
Surface temperature and rainfall accessory sensors are also available as add on to the weather station.
Learn More About Lufft USA Inc
The new Universal Communication Module (UCM™) provides a full featured communication bridge or gateway between Blue Sky Energy’s Integrated Power Net (IPN™) based charge controllers and external systems. Our newest product works with all IPN based Solar Boost charge controllers to allow for remote access via Modbus RS485, Modbus I/P and embedded Ethernet HTTP web site driver. Additional key benefits include periodic FTP data upload to a remote server, 128 days of data logging, and capability to access data and setup parameters world wide. Contact us at www.blueskyenergyinc.com or visit us at Solar Power Internaional. Booth Number: 1121
Learn More About Blue Sky Energy Inc.
The most compact versatile rail-less PV mounting system under the sun. Instead of placing solar panels on top of long rails, simply attach RT-[E] Mount brackets to rafters or roof decking. Once panels are fastened to brackets, the system array is electrically bonded. The result is a visually seamless PV installation that stands the test of time.
- Truly “One With The Roof”. - PE stamped cert. letters available, UL 2703 Classified, ASTM 2140 fully waterproofed. All the best quality, All in one box. Only from Roof Tech
Learn More About Roof Tech
AGM Deep Cycle Sun Xtender® Batteries offer superior reliability and extended cycle life for renewable energy storage systems. Since 1987, the Sun Xtender renewable energy line has been manufactured with the same proven technology and rigorous quality standards used to produce Concorde Battery’s military and civilian aircraft battery lines. . Processes and materials unique to Sun Xtender® set them apart from the competition. The robust build is designed for grid tied or off grid systems in residential, industrial, and commercial environments.
With sizes and capacities to meet a variety of renewable energy requirements, Sun Xtender can customize any battery bank. Premium, reliable batteries Crafted for Quality in the USA.
Learn More About Sun Xtender Series Batteries
Joyce Solar Actuators are designed to precisely position smaller solar tracking Equipment. Their robust and efficient DC motor (24V or 36V) keeps power consumption to a minimum. Travel speeds remain nearly constant regardless of the load.
Ideal for rugged environments common to the solar industry, these cost effective SA actuators have an IP65 protection rating. Self-locking features in the mechanism ensure that the solar actuator can be held in position throughout the daily tracking cycle.
Learn More About Joyce Dayton Corp
Off-grid or on-grid, system designers and installers now have a comprehensive power conversion and storage solution from the name they trust: OutBack. Engineered from the ground up, OutBack’s preassembled systems make balance-of-system components easier to specify and install in any residential or commercial installation. The Radian packs over 8,000 Watts of pure sine-wave continuous power and can be stacked into an 80 kW configuration for larger applications. The Integrated Battery Rack (IBR) is a 28.8 kWh one-box solution with all electrical connections made at the factory and shipped fully-assembled (without batteries) for quick connection on the jobsite.
Learn More About OutBack Power
Looking for a new DC ventilation fan? Backwoods is now manufacturing, here in the USA, a brushless 16 inch, 12/24 V ventilation fan. Our fan is designed to meet your needs every season, either in the greenhouse or as an attic install. Intended for use with 12 volt or 24 volt solar panels as low as 30 watts up to 280 watts and can be used in conjunction with 24 volt battery banks. It will also perform with 285-300 watt, 72 cell modules with open circuit voltages of 44 volts. The SF16 is protected from moderate over-voltage and thermal fluctuations. The Super Fan has been tested through a variety of panel and voltage configurations. We recommend three configurations for “small”, “medium”, and “large” applications. “Small”: all 12 volt panels; a 30 watt solar module will provide an airflow of about 9 mph. “Medium”: a 60 watt will produce up to 17 mph. “Large”: a 135 watt or larger solar module will hit 18 mph and faster. The best thing about our new DC Super Fan is the brushless motor. Motor brush replacements were common on previous fans especially if they were run at high RPM’s. With no brushes the SF16 will outperform other fans. Solve your circulation issue with this solar direct solution!
Learn More About Backwoods Solar
Equipped with an extremely low power, smart interface the Smart SMP pyranometers offer industry standard digital and amplified analog outputs within the well-known CMP series housings. The output range is programmed so that all SMP pyranometers have identical sensitivities, allowing easy installation and exchange for recalibration. Serial communication allows access to measurement data, instrument status, operating parameters and calibration history.
Building on the proven CMP Series design and technology that is used around the world, the new SMP pyranometers add digital signal processing and interfaces optimised for industrial data acquisition and control systems.
Learn More About Kipp & Zonen USA Inc.
20/20™ is Sol’s latest state-of-the-art LED lighting system designed for large spaces such as parking lots and perimeter security areas. It delivers superior light performance in an architectural package that increases pole spacing, lighting uniformity and simplifies installation. The 20/20’s unified design incorporates a low profile LED luminaire, light engine, PV assembly and pole, powder coated your color choice. Designed from the ground up, it exceeds the demands of modern commercial outdoor solar lights to maximize your return on investment. The 20/20™ luminaire features IDA Dark Sky approved optics available in your choice of Type II, III or V.
Learn More About SOL INC.
Conergy is a German-based solar company with subsidiaries all over the world – and what you would call a complete all-rounder. We have mastered every aspect of photovoltaics, becoming the player for complete solutions and services from a single source. For our customers and partners this means: more peace of mind, more output, more service. Since our foundation in 1998 we have advised more than 10,000 customers around the globe and provided more than 2 gigawatts of solar module capacity. We have learned a lot in the process – about sun, wind and weather on all five continents. And about the high standards required by our international customers. Today, we can offer any private customer, enterprise and investor all-round peace of mind, from small solar installations on residential buildings to medium-sized systems on commercial and industrial buildings and up to the biggest multi-megawatt free-field installations.
Learn More About Conergy
With state-of-the-art technology developed by LG Electronics and LG Chem, we are ready to make the world a more solar enriched environment. Through a strong commitment to our principals the LG brand that has earned great respect and popularity around the world. Our relentless pursuit of quality assurance in making superior products is unparalleled.
Our ultimate goal is to help the world experience the array of benefits from using Solar power. To realize this goal, we've tapped the resources of our best scientists, engineers, designers and manufacturing experts to bring products to market that truly stand apart. Price, performance, reliability and quality … everything in our line-up of solar modules is tried and tested like no other. LG applies rigid standards to material procurement, solely targeting products that have undergone previous technical analysis, laboratory tests, and field tests. World-renowned partners supply all of the materials for LG Electronic modules. Our new Mono X NeON module is lightweight, easy to install and the proof that LG Solar is on the cutting edge of the industry.
Learn More About LG Solar
Our batteries have Xtreme thick plates with (XC Diamond Plate Technology) added to them. They have been designed for hours of heavy discharge each day, followed by a fast recharge during the daylight hours. Very few batteries can take the grueling deep discharge-recharge cycle every day for long periods of time. U.S. Battery has proven time and time again that our solar battery line can stand up to this type of battery torture day in and day out for years to come. When you demand reliable energy storage count on U.S. Battery every time!
Learn More About US Battery